Research and Publication

International/National Journal Publications

2015

Harish Narayana, Sukomal Mandal, Subba Rao, Patil S. G., 2015. Particle Swarm Optimization based Support Vector Machine for Damage Level Prediction of Non-Reshaped Berm Breakwater, Applied soft Computing. 27, p. 313-321. (Elsevier Publications).

Amritha Ajeej, Joseph V. Thanikal, C.M.Narayanan, R.Senthil Kumar., 2015. An Overview of Bio Augmentation by Anaerobic co-digestion of Municipal Sludge Along With Microalgae And Waste Paper Renewable and Sustainable Energy Reviews. 50, p.270-276 (Elsevier Publication).

Natiq, Joodi. Satyanarayana, S.V., 2015. Design of Check Dam For Effective Utilization of the Aflaj Water Resources. International Journal of Multidisciplinary Research and Development.2(4), p. 446-449.

Satyanarayana, S.V., Rammohan, Reddy, K., Natiq, Joodi. 2015. Pharmaceutical Waste Water Treatment Using Hydrogen Peroxide Oxidation Method. International Journal of Applied Research.1 (6), p. 290-293.

Satyanarayana, S.V,, Varghese, M., Shaik, Feroz, Lakkim Setty, Nageswara, Rao. 2015. Total Organic Carbon and its Variation in Grey Water Samples. International Journal of Applied Research.1 (7), p.573-575

Yaqoub Al Harthi, Natiq Joodi, Satyanarayana. S, V., 2015. Water Quality Analysis of Falaj Daris At Nizwa Area-A Case Study. International Journal of Multidisciplinary Research and Development. 2(5), p.302-305.

Balamuralikrishnan. R., 2015. Cyclic Behaviour of Reinforced Concrete Beams Retrofitted with Externally Bonded SIFCON Laminates. Asian Journal of Civil Engineering.16 (8), p.1063-1075.

Balamuralikrishnan, R, 2015. Flexural and Cyclic Behavior of RC Beams Retrofitted with Carbon Fiber Reinforced Polymer (CFRP) Fabrics. Asian Journal of Civil Engineering Iran.16, (1), p.67-79.

Aravind, N., Amiya, K., Samanta., Singha Roy D. K. and Joseph V. Thanikal., 2015. Flexural Strengthening of Reinforced Concrete (RC) Beams Retrofitted with Corrugated Glass Fiber Reinforced Polymer (GFRP) Laminates. Journal of Curved and Layered Structures. 2 (1), p.244-253.

Aravind N., Amiya K. Samanta, Singha Roy D. K. and Joseph V. Thanikal, 2015.Theoretical Analysis of RC rectangular beam strengthened with FRP composites. Journal of Structural Engineering. 42(2), p.78-84.

Aravind, N., Amiya, K., Samanta., Joseph V. Thanikal and Singha Roy D. K., 2015. Experimental Study on Pre-Cracked Reinforced Concrete Beams Strengthened with Externally Bonded GFRP Composites. International Journal of Multidisciplinary Research and Development. 2(2), p. 219-224.

Hoby, P., Sajikumar, N., and Sumam, K., 2015. Probabilistic Optimal Design of Rubble-Mound Breakwater. Journal of Waterway, Port, Coastal, Ocean Engineering. 141(4), p. 06015002-1 to 7 (ASCE)

2014

Patil, S.G., Mandal, S., Hegde, AV., 2014. Effect of water depth on the performance of intelligent computing models in predicting wave transmission of floating pipe breakwater, The International Journal of Ocean and Climate Systems. 5/2, p. 65-78.

Harish Narayana, Lokesha, Sukomal Mandal, Subba Rao, Patil S. G., 2014. Parameter Optimization using GA in SVM to Predict Damage Level of Non-Reshaped Berm Breakwater, The International Journal of Ocean and Climate Systems. 5(2), p. 79-88.

R. Al Sehnawi, A. Nakajima, R. Takeshima, H. Al Sadeq, 2014. Experimental Investigation of Amplitude Dependency of Dynamic Characteristics in Elastic and Inelastic Stages of Reinforced Concrete Pier Model, Journal of Civil Structural Health Monitoring, 4(4), pp. 289-301.


2013
Balamuralikrishnan, R., 2013. Cyclic Behaviour of RC Beams Retrofitted with Externally Bonded Thin Laminates, (SIMCON). CoE Journal of Engineering. 9(2), p.53-59.

Balamuralikrishnan, R., Antony Jeyasehar, C., 2013. Retrofitting of Externally Bonded Thin Cement Composites, Journal of Advanced & Applied Sciences. 1(1), p. 20-29.

Aravind N., Amiya K. Samanta, Singha Roy D. K. and Joseph V. Thanikal.,2013. Retrofitting of Reinforced Concrete Beams using Fibre Reinforced Polymer(FRP), Composites-A Review, Journal of Urban and Environmental Engineering.7(1), p.164-175.

2012

Patil, S. G; Mandal, S; Hegde, AV.” Genetic algorithm based support vector machine regression in predicting wave transmission of horizontally interlaced multi-layer moored floating pipe breakwater” Advances in Engineering Software, 2012, 45, pp. 203-212. (Elsevier Publications).

Hasan, M. M; Shafiquzzaman, M; Nakajima, J. and Bari, QH. “Application of a simple arsenic removal filter in rural area of Bangladesh” IWA -Water Science and Technology: Water Supply, 2012, 12, pp. 658-665.

Azam, M. S; Shafiquzzaman, M; Nakajima, J. “Characterization of arsenic in paddy soils irrigated with groundwater in southern Bangladesh”, Environmental Engineering & Management Journal, (2012). (Accepted).

Tran T.T., Shafiquzzaman, M; Nakajima, J. Recycle and Reuse of Charcoal Made from Excess Sludge in Membrane Bioreactor”. Journal of Environmental Systems and Engineering (JSCE-VII), (2012) (Accepted).

2011

Patil, S. G; Mandal, S; Hegde, AV; Srinivasan, Alavandar. “Neuro-Fuzzy based Approach for Wave Transmission Prediction of Horizontally Interlaced Multilayer Moored Floating Pipe Breakwater” International journal of Ocean Engineering, 2011, 38, pp. 186-196. (Elsevier Publication).

Ravi kumar, B. N; Sathisha, N. S; Puttaiah, E. T. “Key Indicators Analysis for Visitor’s Accommodation Facility Satisfaction in Ecotourism Destination- a case study in the hilly region of Chikmagalur”,Journal of Environment and Ecology, 2011, 29(3), pp. 1094-1098.

Shafiquzzaman, M; Hasan, M. M; Nakajima, J. and Mishima, I. “Development of a simple and effective arsenic removal filter based on ceramic filtration” Journal of Water and Environment Technology, 2011, 9, pp. 333-347.

Shafiquzzaman, M; Azam, M. S; Nakajima, J; Bari, Q. H.” Investigation of arsenic removal performance by a simple iron removal ceramic filter in rural households of Bangladesh” Desalination, 2011, 265, pp. 60-66.

Hasan, M. M; Shafiquzzaman, M; Azam, M. S; Nakajima, J. “Application of a simple ceramic filter to membrane bioreactor” Desalination, 2011, 276, pp. 272–277.

Ahmed, A. T; Khalid, H. ”Quantification of the Properties of Treated and Untreated Incinerator Bottom Ash Waste Used as Foundation”. International Journal of Pavement Engineering, 2011, 12(3), pp. 253-261. (Taylor & Francis).

Ahmed, A. T; Khalid, H. ”Effectiveness of Novel and Traditional Treatments on the Elastic Performance of Bottom Ash Waste” Waste Management Journal, 2011, 31(12), pp. 2431-2439. (Elsevier Publication).

Ahmed, A. T; Khalid, H. ”Experimental and Modeling Evaluation for Treatment Effect on the Mobility of Soluble Constituents of Incinerator Bottom Ash Waste” Journal of the Transportation Research Board, 2011, 2253, PP. 51-59.( National Academy of Sciences).

Ahmed, A. T; Khalid, H. ”Back-calculation Models to Evaluate theLFWD Moduli of a Foundation Layer Made with Bottom Ash Waste” Journal of the Transportation Research Board, 2011, 2227, PP. 63-70.( National Academy of Sciences).

Ahmed, A. T. ”Approximated Calculation Model for Plastic Deformations of Granular Waste Materials” Constructions and Building Materials Journal, 2011, 25, Issue 8, PP. 3610–3616. (Elsevier Publication).

2010

Ahmed, A. T; Khalid H. ”A lysimeter and Numerical Characterization of the Leaching of Incinerator Bottom Ash Waste” Waste Management Journal, 2010, 30, pp. 1536–1543. (Elsevier Publication).

Joseph, V. T; Renaud, E; Rene M. “Studies on mixing during startup of inverse turbulent fluidized bed reactor”, CoE journal of Engineering, 2010, 6(2), pp. 47-52.

Rangaraj, Ganesh; Rajagopal, Rajinikanth; Joseph, V. T; Ramamoorty Alwar, Ramanujam. “Anaerobic treatment of winery wastewater in fixed bed reactors, Bioprocess and Biosyst”. Eng., 2010, 33, pp. 619-628.

2009

Rajagopal, R; Rengaraj, G; Renaud, E; Indu, M; Pradeep, K; Joseph, V. T; Michel; T. “High rate anaerobic filter with floating supports for the treatment of effluents from small scale agro-food industries”, Desalination and Water treatment, 2009, 4, pp. 183-190.

Shanmugam, S; Rajasekaran, P; Joseph, V. T. Synthetic dye decolourization, textile dye and paper industrial effluent treatment using white rot fungi Lentines edodes”, Desalination and Water Treatment, 2009, 4(1-3), pp. 143-147.

2008

Neethu, H. M; Varghese, P. R; Joseph, V. T.Investigation on The Bacteriological Quality of Drinking Water From Two Different Sources”, Advanced Biotech Journal, 2008.

International/National Conference Publications

2014

Patil, S.G., Mandal, S., Hegde, AV., 2014. Performance of a Floating Pipe Breakwater based on Intelligent Computing” Proceedings of the Fifth Indian National Conference on Harbour and Ocean Engineering (INCHOE2014), CSIR-NIO Goa, India. 5-7 February 2014, pp. 65-72.

Harish Narayana, Lokesha, Sukomal Mandal, Subba Rao, Patil S. G., 2014. Genetic Algorithm Tuned Support Vector Machine for Damage Level Prediction of Non-Reshaped Berm Breakwater. Proceedings of the Fifth Indian National Conference on Harbour and Ocean Engineering (INCHOE2014), CSIR-NIO Goa, India 5-7 February 2014, pp.157-162.

Natiq Joodi, Satyanarayana. S.V., 2014. Design of Check Dam For Effective Utilization of Aflaj Water Resources. International conference on Hydrology and Watershed Management with a focal Theme on Ecosystem Resilience-Rural and Urban Water Requirements, Hyderabad, India. Oct.30-1 Nov, 2014, pp.668-672.

Alasali, B.,.2014. Efficiency of improving the Specifications of Soil Lenses That Are Formed Near the Tunnel during the Stages of its Investment. Conference on Soil-Structure Interaction, underground structures and Retaining Walls. Vol.1, Saint Petersburg, Russia, June, 2014.pp. 111-118

Aravind N., Amiya K. Samanta, Singha Roy D. K. and Joseph V. Thanikal., (2014), “Manufacturing Process of Corrugated Glass Fibre Reinforced Polymer (GFRP) laminates and Experimental Study on the Debonding Behaviour of Corrugated Laminates”. Proceedings of the National Conference on Innovations in Design & Construction of Industrial Structures. (IDCIS-2014), 3-5 April, 2014, Durgapur, India, pp.95 - 99.

2013

Balamuralikrishnan, R., and Antony Jeyasehar, C., 2013. Cyclic Behaviour of RC Beams Retrofitted with Externally Bonded Thin Laminates (SIMCON), 2nd National Convention on Ferro cement, held at Ferro cement Society and MIT on 13-14th July, 2013, Pune pp.113-117.

Al Sehnawi, R., A. Nakajima, R., Takeshima., H. Al Sadeq and K. Saito, 2013. “Experimental Investigation on Dynamic Characteristics of RC Bridge Model under Different Vibration Levels”, accepted for the 13th East Asia-Pacific Conference on Structural Engineering and Construction (EASEC-13), 2013, Sapporo, Japan.pp.G:1-9.

Aravind, N., Amiya, K., Samanta, Singha Roy D. K., Joseph V. Thanikal and Karim Jaballi,. 2013. Finite Element Simulation and Analysis of corrugated GFRP composites in flexural strengthening of RC beams. Proceedings of the International Conference on Sustainable Manufacturing (ICSM 2013), 29-31 July, 2013, Coimbatore, India, pp. 301-306.

2012

Shafiquzzaman, M; Okuda, T; Nakai, S; Nishijima, W. “Seasonal Variation and Rainfall Effects in Water Quality of Kushiro River in Wetlands Area” In: proceedings of the 9th International Symposium on Water Supply and Technology, Yokohama, Japan, 20-22 November 2012.

2011

Patil, S. G; Mandal, S; Hegde, AV; Muruganandam, A. Hybrid Genetic Algorithm Tuned Support Vector Machine Regression for Wave Transmission Prediction of Horizontally Interlaced Multilayer Moored Floating Pipe Breakwater” In: Proceedings of the 13th International Conference on International Association for Computer Methods and Advances in Geomechanics, IACMAG 2011-Melbourne, Australia, 9-11 May 2011, 1, pp. 557-563.
Shafiquzzaman, M; Hasan, MM; Nakajima, J. “Development of Iron Mixed Ceramic Pellet for Arsenic Removal form Groundwater “ In: proceedings of the 4th IWA-ASPIRE Conference & Exhibition, Tokyo, Japan 2-6 October, 2011.

Hasan, MM; Shafiquzzaman, M; Nakajima, J. “Application of a simple arsenic removal filter in rural area of Bangladesh” In: proceedings of the 4th IWA-ASPIRE Conference & Exhibition, Tokyo, Japan 2-6 October, 2011.

Tuyet, T. T; Shafiquzzaman, M; Nakajima, J. “Enhancement of Membrane Bioreactor (MBR) Performance by Adding Powdered Charcoal Made from Excess Sludge” In: proceedings of the 4th IWA-ASPIRE Conference & Exhibition, Tokyo, Japan 2-6 October, 2011.

Ahmed, A. T; Khalid, H. ”Experimental and modeling study to evaluate LFWD moduli of bottom ash waste used in road foundations” In: Proceedings of the 5th International Conference on Bituminous Mixtures and Pavements, Thessaloniki, Greece, 1-3 June 2011.

Harmin, M. Y; Ahmed, A. T; Cooper, J. E; Bron, F. ”Aeroelastic Tailoring of Metallic Wing Structures” In: Proceedings of the 52th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Denver, Colorado, 4-7 April 2011.

2010

Ahmed, A. T; Khalid, H; Allen, R; Ward, C. ”Influence of treatment on the release and mobility of soluble constituents of incinerator bottom ash waste” In: Proceedings of the 2nd International Conference on Hazardous and Industrial Waste Management, Chania, Crete, Greece, 5-8 October 2010.

2009

Mandal, S; Patil, S. G; Hegde, AV. “Wave transmission prediction of multilayer floating breakwater using neural network”. In: Proceedings of the 3rd International Conference in Ocean Engineering, ICOE, at IIT Madras, Chennai, India 1-5 February 2009, pp. 574-585.

Mandal, S; Vishal Kumar, Hegde, AV; Patil, S. G. “Estimating transmitted waves of floating breakwater using support vector regression model”. In: Proceedings of the 3rd International Congress on Computational Mechanics and Simulation, IIT-Bombay, Powai, Mumbai India. 1-5 Dec. 2009, pp. 173-174.

2008

Mandal, S; Patil, S. G; Manjunatha, YR; Hegde, AV. “Application of neural networks in coastal engineering- an overview”. In: Proceedings of the 12th International Conference on International Association for Computer Methods and Advances in Geomechanics, IACMAG, Goa, India 1-6 October 2008, pp. 1639-1645.


Copyright © 2019 National University of Science & Technology All Rights Reserved
This in-house developed website is powered by NU MIS.