Journals/Magazine

  • Geetha Devi, Anjali Prajith, Majda Abdullah Ali Al-Hadi, Mohammed Al-Abri and Khadija Ali Al Balushi., (2017). Adsorption Studies of Tamarind Shell Carbon in the Treatment of Industrial Effluent. Advanced Science., Engineering and Medicine, 9(8), 628–634.
  • Geetha Devi, Buthaina Hamood Aisari, Samira Mohammed Khamis Al-Moshrafi and Alaa Al Hudaifi., (2017).Treatment of Refinery Waste Water using Environmental Friendly Adsorbent. Journal of The Institution of Engineers (India): Series E , 98(2), 1–6.
  • Johnson A C and Mohammed Aws., (2017).Simulation Study of Finned Double Pipe Heat Exchanger. International Journal of Science And Engineering, 3(8), pp. 1–10.
  • Keloth kaithari Dinesh, S Jayakumar, K M Abubacker and Sureshbabu,V., (2017). Determination of Mass Moment of Inertia with Experimental Validation Using Principle of Conservation of Energy. International Journal of Modern Science and Technology, 2(5), 188–192.
  • Obaid Muslem AL-Hajri, Nageswara Rao,L. and Shaik Feroz.,(2017).Study of Corrosion rate in Water treatment plant in Oil field. International Journal of Chemical Synthesis and Chemical Reactions, 3(1),26-36.
  • Safa Ahmed Mohammed Al-Hinai., Nageswara Rao,L., (2017). Study on minimizing CO2 emissions in clinker unit of Cement plant in Sultanate of Oman. Global Research and Development Journal for Engineering, 2(8),40-43.
  • Yousuf Nasser Hammod Al-Wahaibi., Nageswara Rao,L., (2017). An Innovative Approach to Improve Cleaning Efficiency of Filter Cake in Gas and Oil Drilling Wells. International Journal of Chemical Separation Technology, 3(1),1-14.
  • Walke Santosh, Mandake Manoj and Thool S., (2017). Gas Separation by Polymer Membrane. International Journal of Advances in Engineering Mathematics and Fluid Mechanics, 1(2), 23–30.
  • Rahma Surur Al Ziedi & SantoshWalke., (2017), “Design and Simulation of Hydrogen peroxide plant”, International Journal of Advances in Engineering Mathematics and Fluid Mechanics, Vol.1 (1):5-9.
  • Nabila Al-Rashdia et al., (2017), “Synthesis and Application of Sargassum ilicifolium based biomass for the selective removal of phenol”, Biocatalysts and Agricultural Biotechnology, Vol.9, 236–239.
  • Geetha Devi et al., (2017), “Adsorption Studies of Tamarind Shell Carbon in the Treatment of Industrial Effluent”, Advanced Science, Engineering and Medicine, Vol. 9(8), 628-634.
  • Anna, J.C. et al., 2017. A study on the removal of contaminants from secondary treated municipal wastewater by Solar photocatalysis .Environmental Engineering and Management Journal. 16(7).p. 1451-1456.
  • Mumtaz Mirza M et al., (2017), “Thermal Analysis of Oil Pipeline Coatings”, Research & Development in Material Science, Vol. 1(4), 1-9.
  • Ahmed.A.L. Zaabi, S. Feroz, Nageswara Rao, L., (2016). Investigation of High Corrosion rate oil production Carbon Steel Pipe lines, International Journal of Chemical Engineering and Processing, 2(2),:42-51.
  • Al Rahbi, B., & Dwivedi, Priy. B. (2016). Extraction and Characterization of Furfural from waste Omani Date Seeds. Green Chemistry & Technology Letters, 2(4), 219-223.
  • Dalal Abdul Latif Rajab Al Balushi, Geethadevi, M., Soleen Jabr Ahmed, & Nawal Said Almawali. (2016). Synthesis and Application of Nano and Micro-Silica particles to enhance the mechanical properties of Cement concrete. Concrete Research Letters, 7(2), 113-122.
  • Hasna Al Jabri, Nageswara Rao,L., Shaik Feroz.,(2017). Application of Solar Nano-photocatalysis in the Pretreatment of Reverse Osmosis Seawater Desalination, International Journal of Applied Nanotechnology 3(1), 11-17.
  • Mirza, M. Mumtaz., Desilva, A., & Elansezhian, Rasu. (2016). Comparative Performance of Coatings for ASTM A106B low Alloy Steel. British Journal of Applied Science & Technology, 18(5), 1-24.
  • Noura Ali Moosa, A., Geethadevi, M., & Mohammed, Al Abri. (2016). Preparation and Characterization of Zno Nanoparticles. Journal of Nano Science and Technology, 2(4), 192-194.
  • Kumar, E. A. (2016). Investigation of Machining Parameters in WEDM Zinc Coated Brass Wire using Taguchi Technique. International Journal of Civil, Mechanical and Energy Science, 2(3), 29-31.
  • Lakavat, M., Ramalla, I., & Praveen, Kumar,G.(2016).Sustainable application of magnesium alloy through Electrodeposition of Hydroxyapatite Coating. OSR Journal of Mechanical and Civil Engineering, 13(5), 88-93.
  • Muhammad Mumtaz Mirza, Elansezhian Rasu & Anjali Desilva. (2016). Surface Coatings on Steel Pipes used in Oil and Gas Industries-A Review. American Chemical Science Journal, 13(1),1-23.
  • Sanjana, B., & M, Geethadevi. (2016). A Review on Synthesis, Characterization and Application of Silica Particles. International Journal of Advanced Engineering Research and Technology, 4(7), 249-255.
  • Santosh Walke, Abtihal Al Zadjali., 2016. Plastic Recycling to Produce Fuel. International Journal of Emerging Technologies and Engineering. 3(6), pp. 44-47.
  • Santosh Walke, Nabhan Al Khuresi., 2016. Drying Characteristics of figs using Solar Dryer. International Journal of Emerging Technologies and Engineering. 3(7),pp. 48-52.
  • Santosh Walke, Abrar Ali Omar., 2016. Development of thin film surface coating for reduction of water Evaporation in Oman. International Journal of Emerging Technologies and Engineering. 3(7), pp. 53-57.
  • Abdulrahman Abdulshakoor, A., Rameshkumar, G. R. and Lokesha, M., 2015. Fault Diagnosis in Belts using Time and Frequency based Signal Processing Techniques. International Journal of Multidisciplinary Sciences and Engineering, 6(11), pp. 12-20.
  • Abood, A. N., Fuhaid, Mutlag S. and Hashe, A. H., 2015.Brazing of Aluminium alloy AA 5050 to ductile iron ASTM 60-40-18. International Journal of Enhanced Research in Science, Technology & Engineering, 4(12), pp. 41-46.
  • Al Quwaitai, A. and Krishnan, Pradeep. Kumar., 2016.Study and Design of Flare Reduction Initiative in the
  • Region: A Case Study of Gas Flaring reduction at Oman Liquified Natural Gas Company. British Journal of
  • Applied Science & Technology, 5(14), pp. 1-7.
  • Asaad Abdullah, A. R. and Rameshkumar, G. R., 2016.Design of Protective System for Children Trapped in
  • Parked Vehicle. International Journal of Multidisciplinary Sciences and Engineering, 7(2), pp. 1-7.
  • Bhambare, Parimal. S., Kaithari, Dinesh. K. and Kharote,Ganesh. S., 2016. Fin Spacing Optimization for Isothermal Rectangular Polished Aluminum Fins on a Vertical Base. International Journal of Scientific & Engineering Research,7(3), pp. 887-893.
  • Feroz, S., Dheeaa Al Deen A Aljuboury., Puganeshwary,P. and Hamidi Bin Abdul Aziz., 2016. Comparative study to the solar photo-fenton, solar photocatalyst of TiO2 and solar photocatalyst of TiO2 combined with fenton process to treat petroleum wastewater by RSM. Journal of Petroleum & Environmental Biotechnology, 7(1), 1-5.
  • Feroz, S., Dheeaa Al Deen A Aljuboury., Puganeshwary, P. and Hamidi Bin Abdul Aziz. 2016. Comparative study of advanced oxidation processes to treat petroleum wastewater. Hungarian Journal of Industry and Chemistry, 43 (2), 97-101.
  • Feroz, S., Dheeaa Al Deen A Aljuboury., Puganeshwary, P. and Hamidi Bin Abdul Aziz. 2015. Evaluating the TiO2 as a solar photocatalyst process by response surface methodology to treat the petroleum wastewater. Karbala International Journal of Modern Science, 1-8.
  • Fuhaid, Mutlag. S., Salim, R. K., Abood, Adnan. N. and Ali, Heba. Abdulrahman., 2015. Effect of ZrSiO4 addition on Mechanical Properties of ASTM ZA-27 Alloy. International Journal of Enhanced Research in Science, Technology & Engineering, 4(11), pp. 82-90.
  • Johnson, A. C. and Al Souli, Khulood. R., 2015. Apricot and Plum drying studies using Tray and Solar dryer. International Journal of Emerging Technology and Advanced Engineering, 5(10), pp. 261-265.
  • Johnson, A. C. and Ali Al Mukhaini, E. M., 2016. Drying Studies on peach and strawberry slices. Cogent Food & Agriculture, 2(1), pp. 1-10.
  • Khamis Ali, Al. Sidairi. and Rameshkumar, G. R., 2016.Design of Winglet Device for Aircraft. International Journal of Multidisciplinary Sciences and Engineering, 7(1), pp. 23-30.
  • Kharote , Ganesh. S., Bhambare, Parimal. S. and Eriki,Ananda. K., 2016. Automated Cooling Shade for Vehicles. International Journal of Multidisciplinay Research, 5(10),pp. 30-34.
  • Mirza, Muhammad. Muntaa., Elansezhian, Rasu. And Desilva, Anjali., 2016. Surface coating of Steel Pipes used in Oil and Gas Industry-A Review. American Chemical Science Journal, 1(13), pp. 1-23.
  • Murali, R.V., 2015. Fuzzy Inference System (FIS) based worker assignment model for virtual cells. Journal of Engineering and Applied Sciences. 10(7). pp. 167-173.
  • Nageswara Rao, L., G. Prabhakar., M.V.Rao and S.Feroz., 2016. Experimental Study on removal of zinc metal ions from aqueous solution using Ulvalobata sp. as an adsorbent”, International Journal for Innovative Research in Science & Technology, 2(10), pp. 30-38.
  • Salim, R. K. and Rameshkumar, G. R., 2006. Optimization of Overall Equipment Effectiveness through total Production Maintenance Perspective-A Case Study. International Journal of Multidisciplinary Sciences and Engineering, 7(1), pp. 1-7.
  • Sulaiman Khalifa Saif, A. A. and Rameshkumar, G. R.,2016. Vibration Diagnosis Approach for Industrial Gas Turbine and Failure Analysis. British Journal of Applied Science and Technology, 14(2), pp. 1-9.
  • Anna Jesil., Saravanan.,AM. and Al Hinai Ghaith Matar Khalfan., 2015. Experimental Studies on treatment ofwastewater using photocatalysis. International Journal of Emerging Technology and Advanced Engineering, 5(6),pp. 457-463.
  • Hamed Mattar Al-qamshouai., Nageswara Rao, L., and Feroz,S., 2015. Effect of pH and Total Hardness on stability of Crude Oil water in Oil Emulsions. International Journal of Applied Engineering Research,10(15),35278-35281.
  • J L Jayanthi, D.Kamalakar and Nageswara Rao, L., 2015.Conversion of Waste Plastics into alternative Fuel. International Journal of Engineering Science and Research Technology, 4(8), pp.195-201.
  • Lakavat, Motilal and Nageswara Rao, L., 2015. Innovative Control Measures of Water Pollution-A study on Green Chemistry. American Journal of Materials Science, 5(3C), pp. 169-174.
  • M Geetha Devi, Mohammed Abdullah Nasser Al Shukaili and Syed Murtuza Ali, 2015. Treatability Studies of Pharmaceutical Industry Waste Water using low Molecular Weight Crab Shell Chitosan. Journal of Chitin and Chitosan Science, 3(2), pp. 1-5.
  • Mirza, M. M., Rasu, Elansezhian and Desilva, Anjali.,2015. Corrosion protection of steel pipelines used in oil and gas industry of Oman. British Journal of Applied Science and Technology, 11(6), pp. 1-18.
  • Mirza, M. M., Rasu, Elansezhian and Desilva, Anjali.,2015. Influence of nano additives on protective coatings for oil pipelines of Oman. International Journal of Chemical engineering and Applications (IJCEA- Singapore), 7(4).
  • Munusamy, A. and R Venkatraman, Murali, 2015. Radial Basis Function (RBF) based Prediction of Compact Solar Refrigeration System Performance. Australian Journal of Basic and Applied Sciences, 9(27), pp. 1-8.
  • Nageswara Rao, L., 2015. Coagulation and Flocculation of Industrial Wastewater by Chitosan. International Journal of Engineering and Applied Sciences, 2(7), pp.50-52.
  • Nageswara Rao, L., G. Prabhakar and S. Feroz., 2015.Biosorption of Chromium from aqueous solution by using Citrus reticulata: Equilibrium and kinetic studies. Journal of Chemical and Pharmaceutical Research, 7(6), pp.117-127.
  • Ramprasad A., 2015., Mechanical Properties of Al 6061-SiCp Metal Matrix Composite Weld Joints Made using Friction Stir Welding. International Journal on Recent and Innovation Trends in Computing and Communication, 3(7),ISSN: 2321-8169, pp: 4573 – 4576
  • Ramprasad A., 2015. Influence of SiC particles on microstructural characteristics of TIG weld joints of Al6061- 20%SiCp. International Journal of innovative Science, Engineering & Technology, 2(8), pp 132-137.
  • Samuel, Robin Kumar and Venkumar, P., 2015. Flow shop performance enhancement by hybrid simulated annealing. International Journal of Applied Engineering Research, 10(69), pp. 304-310.
  • Samuel, Robin Kumar and Venkumar, P., 2015. Optimized Temperature Reduction Schedule for Simulated Annealing Algorithm. Materials Today Processings (Elesvier Publication), 2(4), pp. 2576-2580.
  • Satyanarayana, S. V., Varghese, M., Shaik, F. and Nageswara Rao, L., 2015. Total Organic Carbon and its variation in Grey water samples. International Journal of Applied Research, 1(7), pp. 573-575.
  • Shamsha Al Sadi., M.Geetha Devi.,Murtuza Ali Syed.,Feroz,S., and Varghese,M J., 2015. Treatment of textile Industry waste water using solar photo catalysis. Research Journal of Chemical Sciences, 6(10), pp. 1-7.
  • Shamsa Al Saadi, S. Feroz and Nageswara Rao, L., 2015.Treatment of Industrial Wastewater by Solar Nano Photocatalysis. International Journal of ChemTech Research, 8(7), pp.177-182.
  • Al Ruhaili, Muhannad. and Keloth Kaithari, Dinesh., 2015.Design and fabrication of smart parking system for bicycle. International Journal of Students Research in Technology and Management, 3(3), pp. 276-285.
  • Al Siyabi, A. and Keloth Kaithari, Dinesh., 2015. Design and fabrication of weight sensing system for production line. International Journal of Students Research in Technology and Management, 3(1), pp. 223-227.
  • Al-Tubi, Moammer. Ali., 2015. Rotor Misalignment and Unbalance Detection Using Wavelet and Neural Network Techniques. Scottish Journal of Arts, Social Sciences and Scientific Studies, 24(1), pp. 33-44.
  • Al-Tubi, Moammer. Ali. and Al-Raheem Khalid F., 2015. Rolling Element Bearing Faults Detection, Wavelet Denoising Analysis. Universal Journal of MechanicalEngineering, 3(2), pp. 47-51.
  • Feroz, S., Widaad Al Harthy., Mahad Baawain; Shamsa Al Saadi., Varghese, M.J. and Nageswara Rao, L. 2015. Experimental studies for treatment of seawater in a recirculationbatch reactor using TiO2 P25 and Polyamide. International Journal of Applied Engineering Research,10(10), pp. 259-266.
  • Feroz, S., Dheeaa Al Deen A Aljuboury., Puganeshwary P.and Hamidi Bin Abdul Aziz. 2015. Treatment of petroleum wastewater using combination of solar photo-two catalyst TiO2 and photo-Fenton process. Journal of Environmental Chemical Engineering, 3(2), pp.1117-1124.
  • Feroz, S., Hasna Al Jabri., Alaa Al Hudaifi., Fouzal Ameer Marikar. Mahad Baawain. 2015. Investigation the effect of TiO2 and H2O2 for the treatment of Inorganic carbon present in seawater. International Journal of Engineering and Science, 5(2), pp. 50-55.
  • Feroz, S. Hasna Al Jabri. 2015. Studies on the effect of TiO2 nano photocatalysis in the pretreatment of seawater reverse osmosis desalination. International Journal of Environmental Science and Development, 6(7), pp.543-546.
  • M,Jeevarani., and Elansezhian Rasu., 2015. Development of self- cleaning and energy efficient solar cells using two different coating techniques. International Journal of Computer Aided Engineering and Technology, 7(1), pp.47-59.
  • Nageswara Rao, L., P. Rohinikumar and Kamalakar, D.,2014. An Experimental Investigation on Biosorption of Cadmium by Erythrina Variegate Orientalies as an Adsorbent. International Journal of Engineering and Applied Sciences, 1(3), pp.5-9.
  • Nageswara Rao, L., J L Jayanthi, Kamalakar, D., Feroz, S.and V.Rao, M. 2014. Experimental Studies on Removal of Reactive Red 195 dye from aqueous solution by using Activated carbon as an adsorbent. International Journal of Pharmaceutical and Chemical Sciences, 4(1), pp.1-9.
  • Sakhile, Karunya., Shaik, Feroz., Al Harassi, Sheikha. and Sakhile, Kishore., 2015. Treatment of Oman Pharmaceutical Industry Wastewater using Low Cost Adsorbents. Journal of Multidisciplinary Engineering Science and Technology (JMEST), 2(3), pp. 339-341.
  • S,Vandaarkuzhali., and Elansezhian Rasu., 2014.Experimental Investigation of R152a/R22 mixture in an Air Conditioning System. International Journal of Science and Research, 3(12), pp. 1328-1331.
  • Thuraiya Mahir Al Khusaibi., Joefl Jessica Dumaran.,Geetha Devi, M., Nageswara Rao,L., and Feroz,S., 2015.Treatment of dairy wastewater using Orange and Banana Peels. Journal of Chemical and Pharmaceutical Research,7(4), pp. 1385-1391.
  • V, Suresh Babu. and R V, Murali., 2015. A Novel Approach to Generate Assessment Papers and Solution Schemes for Design Based Engineering Modules. International Journal of Computer and Information Technology, 4(2), pp. 449-454.
  • Feroz, S., Varghese, M. J., Ali Syed Murtuza., Nageswara Rao, L., 2015. Treatment of organic pollutants present in seawater by Solar Nano photocatalysis. Nanotechnology for Water Treatment and Solar Energy Applications, Muscat 15-16, December 2015.
  • Feroz, S., Karunya,S., Sarkar, J.P., 2016. A study on treatment of industrial wastewater using low cost adsorbent method. International Conclave on Innovations in Engineering & Management (ICIEM-16), Muscat Oman.
  • Feroz, S., Shah Jahan., Rajnarayan Saha., 2016. Seasonal variations of major ions along the coastline of Oman. International Conclave on Innovations in Engineering & Management (ICIEM-16), Muscat Oman.
  • Feroz, S., Shah Jahan., Rajnarayan Saha., 2016.Seasonal variations of minor ions along the coastline of Oman. International Conclave on Innovations in Engineering & Management (ICIEM-16), Muscat Oman.
  • Feroz, S and Nageswara Rao, L. 13-15 November 2014. Innovative methods to control of water pollution-A study on Green Chemistry, APAS Golden Jubilee Science Congress, India
  • Feroz, S., P. Suresh Babu and Nageswara Rao, L. 13- 15 November 2014. Experimental study on bio sorption of zinc metal by C. reticulata waste powder, APAS Golden Jubilee Science Congress, India.
  • M, Vijay Anand and Elansezhian Rasu., 8-10 December 2014. Effect of different pre-treatments and heat treatment on wear properties of electroless Ni-B Coating on 7075-T6 aluminium alloy, 12th Global Congress on Manufacturing and Management-GCMM-2014, Vellore,India.
  • Rameshkumar, G.R.,K.P. Ramachandran and B.V.A. Rao.(2010)Evaluation of Unbalance and Misalignment Effect on Forward Curved Centrifugal Blower Using Coast Down Time Analysis,International Journal of COMADEM,13(3),p.25-35
  • Rameshkumar, G.R., B.V.A. Rao and K.P. Ramachandran .(2010)Prediction of Coast Down time for Mechanical faults in Rotating Machinery Using Artificial Neural Networks,International Journal of Aerospace and Mechanical Engineering,4(1),p.14-21
  • Rameshkumar, G.R., B.V.A. Rao and K.P. Ramachandran .(2010)Condition Monitoring of Forward Curved Centrifugal Blower Using Coast down Time Analysis, International Journal of Rotating Machinery,doi:10.1155/2010/962804
  • R.Senthilkumar,K.Vijayaraghavan,J.Jagen,M.Velan.(2010) Batch and Column removal of total chromium(VI)from aqueous solution using sargassumpolycystum,Journal of Environmental Progress & Sustainable Energy,29(3),p.334-341
  • JosephrajJagen,Kuppusamy Vijayaraghavan,Senthilkumar Ramalingham,VelanManickam.(2010)Naphthalene degradation kinetics of Micrococcus sp.,isolated from activated sludge,Journal of Clean-Soil Air Water,38(9),p.837-842
  • Illayavel S. and Venkatesan A.(2010) Wear Characteristics of Manganese Phosphate Coated HSS Turning Tool on Machining En 24 Steel,Journal ofManufacturing Technology Today,9,p.8-13
  • Amuthakkannan R,Babu C.K. and Kannan S.M.(2010) an approach to the minimization of makespan in the textile industry using ant colony optimization,International Journal of Services and operations management,792),p.215-230
  • G.K. Vijayaraghavan,M.C. Majumder and K.P. Ramachandran.(2010) NDTE using Flash Thermography:Numerical modeling and analysis of delaminations in GRP pipes,Journal of the British Institute of Non-Destructive Testing,52(9),p.481-487
  • G.K. Vijayaraghavan,M.C. Majumder and K.P. Ramachandran.(2010) Quantitative Analysis of Delaminations in GRP Pipes Using ThermalNDTETechnique,Journal of Advanced Research in Mechanical Engineering,1(1),p.60-68
  • A.M. Saravanan, A Abdul Gani et al.(2010)Remediation of Arsenic contaminated soils using a novel solvent extractant mixture,Journal of theInstitution of Public Health Engineering,2009-10,4,p.9-13
  • S.M. Saheb,A.K. Bhattacharjee and A. Vallavaraj.(2010) Performance evaluation of a wireless local area network deploying real-time multimedia traffic,Caledonian Journal of Engineering(accepted for publication)
  • R.V. Murali,A.B. Puri, Khalid Fathi and G. Prabhakaran.(2010) ANN Worker Assignment Model With Real Time Industrial Data,InternationalJournal of Industrial Engineering Practices, (accepted for publication)
  • M.Achuthan,A. Venkataraman and R. Rathnasamy.(2010)Experimental Analysis on the Performance Characteristics of Compact solar Refrigeration system,Energy Engineering Journal,(accepted for publication)
  • S.Vishnupriyan,M.C. Majumder and K.P. Ramachandran.(2010)Optimal fixture parameters considering locator errors,International Journal ofProduction Research, (accepted for publication)
  • K.Raja, K.M. Senthilkumar, V. Selladurai.(2010) Ant Colony Approach for Makespan Minimization on Unrelated Parallel Machines,Journal ofManufacturing Engineering, (accepted for publication)
  • Murali, R.V., Prabhakaran, G., Puri, A.B. and Ragavesh, D. (2009). ‘Worker efficiency and job criticality consideration in virtual cellular manufacturing environments’, International Journal of Advanced Operations Management, Vol. 1, No. 2/3, pp.203–223.
  • Murali, R.V., Puri, A.B., and Prabhakaran, G. (2010). ‘Artificial neural networks based predictive model for worker assignment into virtual cells’, International Journal of Engineering, Science and Technology, Vol. 2, No. 1, pp. 163-174.
  • Murali, R.V., Puri, A.B., Khalid F. Al-Raheem and Prabhakaran, G. (2010). ‘ANN Worker assignment model with real time industrial data’, International Journal of Industrial Engineering Practice, Vol. 2, No. 2, pp. 41-47.
  • Murali, R.V., Puri, A.B., Khalid F. Al-Raheem and Prabhakaran, G. (2011). ‘Work force Assignment in a Glass Mould Manufacturing Company using Artificial Neural Network‘, Caledonian Journal of Engineering, Sultanate of Oman (accepted for publication, August 2011).
  • R.Edwin Browne, K.P.Ramachandran, A.K.M. Desilva& D.K. Harrison. (2007) Experimental investigation to analyse the effect of unbalance in a horizontal rotor system using coast down factor, Condition Monitoring and Diagnostic Engineering Management 10(3), p.11-18.
  • K. F. Al-Raheem, Asok Roy, K. P. Ramachandran. D.K. Harrison & S. Grainger. (2007) Rolling Element Bearing Fault Diagnosis Using Laplace-Wavelet Envelope Power Spectrum EURASIP Journal of Advances in Signal Processing, 1, p. 70-83.
  • K.Raja&V.Selludurai. (2008) Earliness-tardiness scheduling on uniform parallel machines using Simulated Annealing and Fuzzy Logic Approach: Journal of Engineering Manufacture, Proc.I Mech,222 , p.333-346.
  • K.Raja&V.Selludurai. (2008) Quality Function Deployment in Agile Parallel Machine Scheduling through Neural Network Technique Asian Journal of Scientific Research, 1(2), p.146-152.
  • K.Raja&V.Selludurai. (2008) Non-Identical Parallel Machine Scheduling using Genetic algorithm and Fuzzy Logic approach” International Journal of Services and Operations Management, 4(1), p.72-101.
  • K.Raja&V.Selludurai. (2007) A Genetic Approach for Scheduling Independent Jobs on Uniform Parallel Machines”, Journal of Manufacturing Engineering, Slovakia, 4(6), p.12-16.
  • R. Sivasankar; P.Asokan; G. Prabhakaran &VenkataPhani. (2007) A CAPP Framework with Optimized Process Parameters for Rotational Components International Journal of Production Research (in Press).
  • K.P.Padmanaban&G.Prabhakaran. (2007) Dynamic analysis on optimal placement of fixturing elements using evolutionary techniques International Journal of Production Research, (in Press).
  • M.Uthayakumar, G.Prabhakaran&S.Aravindan. (2008) Study on Aluminium alloy Piston reinforced with Cast Iron inserts, International Journal of Material Science, 3, p.1-10.
  • M.Uthayakumar, G.Prabhakaran&S.Aravindan. (2008) Machining Studies on Bimetallic systems using Taguchi Method International Journal of Machining Science and Technology (in Press).
  • S. Feroz& VSRK Prasad. (2007) Variation of mass transfer coefficients in the radial direction for submerged impinging multi-jet flow of fluid electrolyte, Turkish J. Eng. Env. Sci., 31(4), p.235-242.
  • L.Govindarajan&T.Karunanithi. (2007) Multiobjective Optimization of Process Plant Using Genetic Algorithm, International Journal of Computational Intelligence And Applications, 6(4), p.315-327
  • L.Govindarajan, M.Rajasimman&C.Karthikeyan. (2007) Artificial Neural Network Modeling of Inverse Fluidized Bed Reactor used for treating Starch Industry Wastewater, Journal of Applied Science and Environmental Management, 11(1) p. 35-44.
  • L.Govindarajan, R.Saravanan&T.Karunanithi. (2007) A New methodology for the prediction of mass transfer coefficient for spillage of chemicals, Journal of Applied Science and Environmental Management, 11(2), p. 25-32.
  • L.Govindarajan, B.Gopalakrishnan, T.Karunanithi&P.K.Bhaba. (2007) Genetic Algorithm Based Design Optimization of Reactor- Heat Exchanger System, Process Modeling and simulation, 214-219.
  • L.Govindarajan, N.Praksah, S.A.Manikandan&V.Vijayagopal. (2008) Prediction of biosorption Efficiency for the Removal of Copper (II) Using Artificial Neural Networks, Journal of Hazardous Material, 152 p.1268-1275.
  • L.Govindarajan, M.Rajasimman&C.Karthikeyan. (2008) Artificial Neural Network Modeling of an Inverse Fluidized Bed Bioreactor, Journal of Environmental Science, Paper (in Press).
  • Nitin Raut,& Shah Jahan. (2008) Review of Membrane Bioreactors for Waste Water Treatment. Pharma Bio World. P.26-29
  • R. Senthikumar, J.Jegan, P.V.R. Iyer& M. Velan. (2008) Crab shell particles for the removal of lead(II) ions from aqueous waste solution International Journal of Environment and Waste Management (in Press).
  • S. Feroz, Nitin Bhaurao Raut, & Suleiman Mohammed Al-Abry. (2008) Residence time distribution studies in miniature pipes, Annals of Iraqi Science (accepted for publication).
  • S. Feroz & Nitin Bhaurao Raut. (2008) Significant increase in waste incineration-Concerns over pollution, Pharma Bio World (Insight into the pharmaceutical and biotech industries)
  • S. Feroz&V.S.R.K. Prasad (2008) Average mass transfer coefficients in electrolytic cells, The Journal of Institution of Engineers (India), 88 pp 11-17.
  • S. Feroz, BV Lakshmana Rao, C Bhaskarasarma& VSRK Prasad (2008) Mass transfer studies with submerged impinging jets in closed cylindrical cell in the presence of solids, The Journal of Engineering Research, 5 (1) pp 30-36.
  • M. Mahantesh Nadakatti, A Ramachandra& A. N. Santosh Kumar, (2008) Artificial Intelligence-based Condition Monitoring for Plant Maintenance, Int. Jour. of Assembly Automation, 28,2, 143-150.
  • A. Muruganandam, G. Prabhakaran & R. V. Murali, (2008) Comparative study of evolutionary techniques for design of cellular manufacturing systems”. ,International Journal of Industrial Engineering Practice (in Press).
  • S. Vishnupriyan, L. Govindarajan, K. P. Ramachandran & G. Prabhakaran, Quality Improvement in Higher Education through Normalization of Student Feed back data using Evolutionary Algorithm, International Journal of Applied Management Technology (in Press).
  • R. Senthilkumar, K. Vijayaraghavan, J. Jegan& M. Velan, “Batch and column removal of chromium (VI) from aqueous solution using marine macro algae”, Journal Separation of Science and Technology, ( in Press)
  • K. Raja& V. Selladurai (2008) Minimization of total tardiness using Ant Colony Algorithm in Parallel Machines, International Journal of Manufacturing Research, (in Press).
  • Feroz, S. Venkateswara Rao, S. and Nageswara Rao, L. (March 2009) “Biological treatment of industrial wastewaters using up-flow anaerobic contact filter”, The Journal of Institution of Engineers, Vol 89, ,pp 3-7.
  • Feroz, S. and Shah Jahan, (Jan-June 2008), “Removal of Copper Ions from Effluents using Coconut Shell Coke in a Fixed Bed Adsorber”, Caled. J. Eng. Vol 4, 01, pp 7-14.
  • Al-Raheem, Khalid F., Roy, A., Ramachandran, K. P., Harrison, D.K. and Grainger, S. (2009): “Rolling Element Bearing Fault Diagnosis Based on Autocorrelation of Optimized Wavelet De-noising Technique”, International J. of Advanced Manufacturing Technology, vol.40 (3-4), pp. 393-402.
  • Muruganandam, A., Prabhakaran, G., and Murali, R.V., (November 2008), “PRABHA- A new heuristic approach for machine cell formation under dynamic production environments” International Journal of Applied Management and Technology”, Vol 6, 03, pp 191-221
  • Vishnupriyan S., Govindarajan L., Prabhakaran, G., and Ramachandran, K.P., November 2008), “Quality Improvement in higher education through normalization of student feedback data using evolutionary algorithm” International Journal of Applied Management and Technology”, Vol. 6, 03, 222-260.
  • Raja, K and Selladurai, V (2009) “Minimization of total tardiness using Ant Colony Algorithm in parallel machines” International Journal of Manufacturing Research (In press).

Copyright © 2019 National University of Science & Technology All Rights Reserved
This in-house developed website is powered by NU MIS.